JAWS ARCTIC CAT PRO CLIMB 2012-2017 & 800 ctec-2 2018
+16 HK MED LUFTBOKS MOD KIT PEAK POWER 8400-8500
+26 HK HSK LACE RACE PORTING PEAK POWER 8450-8600
-JAWS EFFEKTPIPE/Y-PIPE PRO CLIMB
-JAWS trail race SLUTTDEMPER
-Power commander 5
-LAke RACE PORTING
Norsk Monteringsannvisning følger med
Arctic Cat ’10-’11 M8HO/HCR 800 Twin Pipes
(for high elevation only) A powerful and reliable set of twin pipes that tuck neatly under the hood! This package adds a 15 hp increase at 78-8000 rpm while allowing for an 18 lbs weight loss. Now available for high alititude applications (3000ft +). A Boondocker box and clutching adjustments are required.
Arctic Cat ’07-’11 M1000/Crossfire 1000 Twin Pipes
(for all elevations) We have updated our M1000 twin pipes. They offer more power than the original series. A lightweight set of twins that add an easy 28hp (75-7700 rpm) to your M1000 at high altitude (above 3000ft). These powerful pipes offer a tremendous increase throughout the entire power band. A Boondocker box and clutching adjustments are required. They are silenced with our lightweight twin mufflers.
Our twin pipes for the low elevation (0-3000ft) riders achieve an amazing 20+hp increase over stock at 75-7800 rpm. These pipes are paired with an unbelievably quiet trail silencer. The throttle response these pipes have is unbeatable. This package runs on 91 octane fuel and requires a Boondocker control box as well as some minor clutching changes.
Arctic Cat ’07-’11 F1000 Twin Pipes
The most powerful set of twin pipes for the F1000 on the market. Adding tremendous throttle response and tons of top end power (20+hp) these are the most reliable set of pipes you can buy for this machine. A trail set of pipes, running on pump gas and silenced with our made for the trail quiet silencer. For ported engines and race gas we offer 40+hp increase packages.
Arctic Cat ’07-’09 M-8/Crossfire 800 Twin Pipes
(for all elevations) Increase your peak power by 10+hp at sea level and 15+hp at (3000ft+) 78-8300 rpm with our twins for any M-8 or Crossfire 800. A reliable set of pipes that offer much greater throttle responese and are easily tuned. They include our popular twin silencers that allows for a lightweight, great sounding system or our amazing quiet trail silencer to maintain that stock sound level, each exiting out the stock hole. Boondocker control box required. Pipes work excetionally well on ported engines. Also available are our big bore twins for the M8 (900-925 cc).
Arctic Cat ’05-’06 M7 Twin Pipes
Our twin pipes for the M7 for high altitude (above 3500 ft.) are loaded with 15+ hp and reach peak power at the stock rpm. For extreme elevations (10,000ft+) we offer our M7 HA. All systems reach peak power at 78-7900 rpm and add an amazing 6-7 mph track speed increase. We tuck the pipes neatly under the hood and silence with our lightweight twin glass packs. All these pipes require are some simple clutch weight adjustments. There is no fuel control box required for the ’05 models however we do recommend a fuel control box with the ’06 models
M8 & M9 Big Bore Pipes
We offer a powerful set of pipes for any of the M8 and M9 big bore kits out there. Our durable pipes are packed with the most hp on the market. These reliable twins are fitted to the ’05-’07 M7 chassis with our long life single canister that exits through the stock location. The pipes do vary between the 800 and 900. These pipes reach peak power at 78-7900 rpm.
F8 & F9 Big Bore Pipes
Did you put a 800 or 900 big bore package on your your F7? If so we have the perfect set of pipes to achieve your maximum hp. These twins are fit to the Firecat 700 chassis with our long life single canister. The pipes do vary between the 800 and 900. These pipes reach peak power at 78-7900 rpm.
Full Mod F7 and F6 Twin Pipes
If full mod is your forte, then we have an awesome set of twins to compliment your F6 or F7. Spinning at 9300-9500 rpm and running on race fuel we guarantee that with our pipes will help you achieve the most power possible from your tricked out F7. Check out other race pipe.
We also offer twin pipes for the M8, F8, M9 and F9 packages to fit in the M7 or F7 chassis. See below for more information.
’98-’02 Arctic Cat Thundercat/Mountain Cat 1000 Pipes
We packed tons of horsepower into these pipes, 20 to be exact. The top end speed is increased immensely as the Thundercat tops out at almost 190 hp while maintaining the rpm’s between 8400-8600. We recommend the accompaniment of a set of ‘V-Force’ reeds as well as crankcase modification (that can be done here at Jaws). We utilize an extra large set of silencers that offer a quiet throaty sound. Check out these sharp looking pipes in our CAT 1000 pipe “photo album”. There is no doubt that this exhaust system will help to put you onto the jealousy list of your buddies or the hate list of your competitors. We now offer a 3 into 1 single muffler that keeps these pipes even quieter.
Arctic Cat Thundercat 1000 in ZR chassis
If you dropped a powerful Thundercat engine into the lighter more mobile ZR chassis, then we have the pipes for you. These pipes offer the exact same specifications (20 hp increase) that flows custom with our Thundercat exhaust systems. These pipes fit comfortably under the hood and exit out the stock location.
’03-’06 Arctic Cat Mountain Cat/King Kat 900 Pipes
Our pipes offered for the Mountain Cat 900 in the mountains became available in early 2003. Since then they have become very popular, we can’t seem to keep them stocked. They offer tremendous throttle response and reach peak power at 7900 rpm. The twin pipes flow into a single canister that has deep exhaust note and exits easily out the stock location (please specify year as outlet locations do vary). This exhaust system functions best at altitudes above 2500 ft.
‘D’ Pipes (Arctic Cat Big Bore Twin Pipes)
Known as the ‘D’ series pipes, that we later labeled the ‘Dominator’ set as that is exactly what they are doing. These twins are offered with either a quiet muffler box, the lightweight twin glass packs or the lightweight single canister. They are compatible with many of the big bore top end kits for the ZR/MC 900 on the market. Don’t settle for just any set of pipes, go for the best. These pipes rev at 78-7900 rpm. For a slightly more aggressive set of pipes please ask us about our 82-8400 rpm pipes.
’01-’03 Arctic Cat ZR 800 Pipes
We manufacture a strong set of twin pipes for the ZR and Mountain Cat 800. Our pipes work exceptionally well on both the carburetor or EFI version. Low-end, mid-range and top-end these pipes offer an increase of 9 hp. There is some easy jetting and clutching required. The pipes are silenced with our over-sized twin canisters or our single canister. There is no doubt that these are the dominant 800 twin cat pipes on the market.